Minggu, 15 Januari 2012

Types of Automotive Lifts

Here are the different types, available from the garage equipment supply dealers:

In-Ground

This type of vehicle lift is mounted below the garage floor. It consists of one or more pistons, depending on the maximum weight capacity. Elevators with one or two pistons are used for compact, medium and full sized cars. Elevators with three or more pistons are used for larger vehicles such as buses and RV's.

two post surface mounted

The most common vehicle lifts used today called the two post surface mounted lift. For each column, has a lift arm. These are controlled mechanically, electronically or hydraulically.

Multi-Post runway Automotive Lift

The most common type is a four-post lift installed, which makes extensive use of oil change, transmission service and muffler shops. You'll find this type of auto lift the wheel alignment becomes uslugu.Automobil drove in two runways and raised, exposing her bottom.

Low / Mid Rise Frame Engaging Lift

This type of vehicle lifts involved lifting the vehicle frame. There are two ways this type can work. One of the ways of the scissors-style, moving straight up. The second is a parallelogram-style, moving forward or backward, while raising or lowering. This type is commonly used for brake, tire and wheel services, and auto body repair.

Drive-S Parallelogram

Parallelogram Drive-S is surface mounted vehicle lift. It has two runways, where the car wheels should be set. This is raising mechanism that moves the vehicle a short distance forward or backward while raising or lowering. The direction depends on how the lift is installed.

Scissor Lifts

Scissor lift can be a fixed type of pad or roll-on frame / chassis interesting type. This is raising mechanism that is similar to a parallelogram lift. Their main difference is that the scissors lift going up and down the straight vertical path.

Movable-Type Turning Wheel Lift

This type of vehicle used for raising vehicles that are longer than conventional cars, such as buses and trucks. It consists of several columns in lifting sets of two, four, six or više.Stupci can be moved and connected to the other columns, so that their movements are synchronized.

0 komentar:

Posting Komentar

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Blogger Theme by Lasantha - Premium Blogger Templates | Affiliate Network Reviews